Пожалуйста, используйте этот идентификатор, чтобы цитировать или ссылаться на этот ресурс: http://dspace.nuph.edu.ua/handle/123456789/26725
Название: Development of the method for estimating complex formation using the electrochemical impedance spectroscopy on the example of the doxycycline and iron (III) interaction
Авторы: Dobrova, A.
Antonenko, Y.
Golovchenko, O.
Harna, N.
Garna, S.
Georgiyants, V.
Доброва, Г.
Антоненко, Є.
Головченко, О.
Гарна, Н.
Гарна, С.
Георгіянц, В.
Ключевые слова: electrochemical impedance spectroscopy;complexation;antibiotics;drug interaction;doxycycline hyclate;антибіотики;доксициклін;комплексоутворення;спектроскопія;антибиотики;комплексообразование;спектроскопия;доксициклин
Дата публикации: 2021
Библиографическое описание: Development of the method for estimating complex formation using the electrochemical impedance spectroscopy on the example of the doxycycline and iron (III) interaction / A. Dobrova, Y. Antonenko, O. Golovchenko, N. Harna, S. Garna, V. Georgiyants // ScienceRise: Pharmaceutical Science. - 2021. - № 1 (29). - Р. 31–38. doi : https://doi.org/10.15587/2519-4852.2021.225689
Краткий осмотр (реферат): The aim. To develop an EIS method for study the interaction between medicinal products and metal salts on the example of the Doxycycline and iron (III) interaction. Materials and methods. Measurements of the total impedance of the studied solutions have been performed using a vector circuit analyzer ZNB40 (Rohde & Schwarz, Germany). The calculations of electrical models were performed using the software package EC-Lab V10.40. Measurement cell was made of Teflon, 1 ml of volume, had 2 parallel nickel plated steel electrodes with diameter 6 mm, distance between electrodes is 9 mm. Basic electrical elements of model circuit were calculated according to type of electrochemical process that were described by Nyquist plot (RW, Rct, RS, Cd, CS etc.). Solutions were prepared immediately before the measurement. Measurements were performed at a temperature of 296±3 K. 6 control solutions of doxycycline and 6 control solutions of iron (III) chloride were prepared and measured. 11 study solutions at a molar ratio 1:6, 1:5, 1:4, 1:3, 1:2, 1:1, 2:1, 3:1, 4:1, 5:1, 6:1 were prepared and measured. Concentration of the solutions was X∙10-3 mol/L respectively. Results. EIS analysis of Nyquist curves of study solutions in the range of molar ratios 1: 6, 1: 5, 1: 4, 1: 3, 1: 2, 1: 1, 2: 1, 3: 1, 4: 1, 5: 1, 6: 1 showed a change in the dynamics of electrical resistance at a ratio of 1:1. In the aqueous solution at T = 296±3 K the constant formation of the solution of doxycycline hyclate and iron (III) chloride is 2.9. This value of the complexation constant indicates that doxycycline hyclate forms a stable metal-ligand complex with iron (III) ions. Conclusions. EIS method can be applied to study the interaction of medicinal products. Model of this study was created on the example of doxycycline hyclate and iron (III) chloride. Metal-ion complexation of these two molecules was once again confirmed by using the EIS method
URI (Унифицированный идентификатор ресурса): http://dspace.nuph.edu.ua/handle/123456789/26725
Располагается в коллекциях:Наукові публікації кафедри фармацевтичної хімії

Файлы этого ресурса:
Файл Описание РазмерФормат 
Development of the method for estimating complex formation using the electrochemical impedance.pdf694,39 kBAdobe PDFПросмотреть/Открыть


Все ресурсы в архиве электронных ресурсов защищены авторским правом, все права сохранены.